As warmer weather sets in and sunshine fills the skies we begin to get excited for boating season! At Strong’s Marine we want to be fully prepared when you are to begin your boating fun. In order to get you out on the water in a timely and safe manner, Strong’s must take the necessary steps to commission your boat or yacht.

BOAT AND ENGINE COMMISSIONING


We charge and connect your batteries, apply anti-corrosive lubricant to all battery terminal connections, start engine, and check all operating systems. We sea trial your boat in water and verify for proper W.O.T. R.P.M.’s. We check all boat and engine gauges and all warning alarms. Check and adjust steering torque, control cables, and belt tension. Evaluate electrical systems including checking for proper operations of bilge blower, bilge pumps, navigation lights, cabin and dash lights, salt water wash down, baitwell system, icemaker, air conditioning, and 110 volt dockside power. (Parts and labor for any needed repairs found are additional).
  • Single, Twin, or Triple O/B
  • Single or Twin I/O & I/B
* All accessory systems are additional. Launch/Haul are additional if not winter stored at Strong’s.

ACCESSORY COMMISSIONING SERVICES


1. Fresh Water Systems: Refill and flush with fresh water. Add water purifier, activate, and check for proper operation. Plus materials.
2. Hot Water Heater.
3. Head: Charge toilet & holding tank and check for proper operation, plus materials.
4. Zincs: inspect and replace as necessary.
5. Generator: Commission and run under load, plus materials.
6. Mast: Step and Rig.

BOTTOM PAINT


Repainting- includes light scraping and sanding, wiping down, tape waterline, and apply one coat of premium ablative paint.

Unpainted- includes de-waxing, establishing and taping a waterline, priming, and two coats of premium paint.

DRIVE TRAIN PAINT


We apply anti-fouling protective paint. This is recommended for in-water boats.

COSMETIC SERVICES:


SPRING CLEANING– Includes a thourough cleaning of your hull, topsides, and cockpit. Cabin cleaning is not included. Flybridge add’l.
HULL WAX ONLY
 We wash and wax your hull sides, rub rail down to the chines. Includes all service materials.
WASH, WAX, & DETAIL
We wash, wax, and detail your boat including hull sides and deck*. We clean engine bilge area, glass, and oil outside wood work. We also vacuum inside, clean, and Armorall cockpit vinyl, polish rails, and lubricate canvas snaps. Includes all service materials.
* Compounding additional if needed.